Join our family today!

Inspect filters; clean or replace as needed

Clean outdoor coil

Clean indoor coil and apply self-rinsing cleaner when possible

Clean area around outdoor unit

Remove leaves and other debris from inside outdoor unit

Clean condensate drainage system

Clean and adjust blower units

Measure refrigerant pressures

Measure Delta T

Measure static pressure

Measure capacitor capacitance

Measure volts/amps of control and electrical components

Lubricate all moving parts

Inspect and adjust all electrical connections

Inspect and test starting components

Test safety controls

Inspect for refrigerant leaks

Inspect airflow in register

Inspect physical connections of individual parts

Inspect filters; clean and or replace as needed

Inspect contacts and relays for wear

Inspect pressure and temperature

Inspect and adjust blower motor and belts

Test thermostat and review settings

Inspect and straighten fins

Secure electrical connections

Clean condensate drain

Measure and charge refrigerant levels

Adjust refrigerant levels

Check controls

Clean coils

Inspect and clean burners

Check carbon monoxide levels

Inspect pressure and temperature

Inspect safety devices and controls

Test emergency shut offs

Inspect ductwork

Flush and clean drain line and trap

Inspect heat exchanger for leaks and cracks

Clean and adjust burner components

Clean ignition components

Inspect heat exchanger

Measure gas pressures

Measure carbon monoxide levels